Frameless Cabinet Reveals: Everything You Need to Know

Proper cabinet reveals are key to achieving clean, consistent spacing. In this video, Justin from Cabinet Joint explains standard frameless cabinet reveals and when an increased side reveal may be needed.

Whether you’re a DIYer or a professional, understanding cabinet reveals can help you achieve consistent spacing and a clean, finished look. Not sure if an increased side reveal is right for your cabinet layout? Your Cabinet Coach can help you determine where increased reveals may be needed for your project. Call us at 888-211-6482 for assistance.

Related Videos

Related Resources

Discussion

Leave a Reply

Your email address will not be published. Required fields are marked *

Video Transcript

Introduction

It's a glorious day here at Cabinet Joint. I'm Justin, and today we are going to talk about increased side reveals on our frameless cabinets.

Increased Side Reveal Info

With our frameless cabinets, there is an ⅛" reveal all around. So, ⅛" from the top of the drawer front to the top of the cabinet, ⅛" in between, and ⅛" to the bottom, and with doors, in between your butt doors.

Except on sides, there's a ¹⁄₁₆" reveal. That way, when you put your cabinets together, that creates an ⅛". However, in a scenario where your cabinet is butting into, say, a taller, deeper cabinet or maybe an end panel or the end of a run, you don't want to just have that ¹⁄₁₆" reveal.

So, what we're able to do is create an increased side reveal. And what that does is cuts the drawer front or the door down by ¹⁄₁₆" on the width. So this creates that ⅛" reveal.

So once again, this is helpful for the end of runs or if you have an end panel or a tall fridge cabinet. This is an option that you can talk to your cabinet coach about.

Outro

If you have any other questions, always feel free to reach out to them, or you can call us at 888-211-6482.

Thank you for watching. Have a great day.

Get a Quote

Get started on your project quote today. We’re only a phone call away to walk you through the process.

GET A QUOTE

“Their website and associated YouTube videos make the design, assembly and install process a pleasure. We couldn’t recommend them enough for any size project!” — Jason from Budd Lake, NJ