If you have decided on a painted kitchen, but want with slightly more door design detail than the 10RC2, then consider the 10RC3 door. While similar in appearance, this door uses a wider symmetrical cutter shape, which increases the distance between the door frame and the panel raise areas of the door, all while being a solid one-piece MDF door. Note: inside corner of routed detail are not square, they are radiused. For squared corners, consider the SQ series of MDF doors.
- Available in painted MDF using any of our Colortone (CWS) paints, custom Prism (Sherwin Williams) paint collection, or in Primer (customer to paint).
- Also available in raw, unfinished (none – finished by customer) MDF.
The cross-section below is an example of how your door will look, but any profiles you choose will determine the final look of your door.
About the Picture: Frosty White on MDF, L-149 edge profile.
|Edge Profiles:||B-2, C-2, H-2, L-034, L-059, L-149, L-253, L-382, L-686, L-803, L-1160, LC-2, ME (Machined Edge), PRS-2, & V-2.|
|Framing Beads:||None – Design Specific, no options. (note: the RC series doors are radiused on the inside corners of the framing.)|
|Panels Raises:||None – Design Specific, no options.
(note: MDF products greater than 26″ wide or 48″ high will be made with two equal panels, unless otherwise specified.)
AVAILABLE DESIGN OPTIONS
|Mullion/Frame only Doors:||Yes – Standard lite configurations only.|
|Pegs and Grooves:||No|
|Appliance Panels:||Yes – Apply over plywood or 1/4″ MDF panel.|
|Door Frame Modifications:||Yes|
|Hinges/Hinge Boring:||Yes – Hinge boring is automatic when ordered with RTA cabinets, but no hinging can be requested. If ordering doors only, hinging must be specified.|
There are no reviews yet.