Note: Due to increased demand, Conestoga has extended standard lead times by 3 days until further notice.

The Cabinet Joint

Miscellaneous Items

Miscellaneous and specialty items such as fillers, toe board and other essentials often complete the kitchen. Expand each category to see all the items. Click to view full product details.

For your convenience, you can download the entire Miscellaneous Items catalog as well.

Download Miscellaneous Items PDF

Toe Kick and Fillers

Toe kicks and fillers are often forgotten in kitchens, but they are a necessary part of any installation. Toe kicks provide a seamless, finished look to your installed cabinets while fillers allow you flexibility in your installation process. We do recommend the Extended Stile option on cabinets going against walls, but a few fillers on a job can be a big help in finishing up your installation.

Hide / show product category

  • Toe-board

    Toe Board Strips – 96″ Plywood

    ITEM CODE: TE5003

    SIZE: 4″ H x 96″ wide only

    DESCRIPTION:  1/2″ x 4 x 96″ loos toe board strips, matching veneer and finished to match when finish is requested.  Not available in custom woods. Unfinished edges. Exposed ends must be back-mitered and capped with toe board wedge. Allows seamless toe area when installed after cabinet installation

  • Filler Strip WALL

    Slab Filler Strip

    ITEM CODE: SLAB FILLER

    SIZES:
    Width: Minimum width of 1.5″, no max within reason
    Height: 5 to 120″  in 1/16″ increments

    TO ORDER: Indicate SLAB FILLER with your desired width and height

    DESCRIPTION:  Standard filler strip in any size. If fluting is desired, order as a fluted filler though the custom filler program outlined in our Accessories section.  Will NOT include any returns to wall. Only a solid wood filler.

Filler Columns

Filler columns are basically a filler (fluted or plain) affixed to a narrow cabinet box. This makes them ideal for any application where a filler cant be sandwiched between other cabinets or where you want to pull your filler forward of adjacent cabinets as design statement.

Hide / show product category

  • Wall Filler Columns 0330-0665

    Wall Filler Column, 3″ & 6″ Wide

    CABINET CODE: WFC  (CSWFC will appear on your quote if your cabinet is not one of the standard sizes – CS = Custom Sized)

    SIZES:
    Width: 3 and 6″ Only
    Height: 12 to 65 in 1/16″ increments
    Depth: 5.5 to 27″ in 1/16″ increments

    TO ORDER: Indicate WFC + cabinet width (6″ only) + cabinet height. IE: WFC0642 for a 6 x 42″ high Filler Column. If different than standard 12.5″ depth is required, note as special instruction.

    DESCRIPTION:  Wall Filler Column box with affixed filler.  Filler available fluted or unfluted. Tapered or rounded must be specified. See fluted filler information in Accessories section for fluting details. 3″ columns have 3 flutes, 6″ columns have 6 flutes.

  • Base Filler Columns with Toe Kick

    Base Filler column, 3″ & 6″ Wide

    CABINET CODE: BFC  (CSBFC will appear on your quote if your cabinet is not one of the standard sizes – CS = Custom Sized)

    SIZES:
    Width: 3 and 6″ Only
    Height: 31.5 to 96″  in 1/16″ increments
    Depth: 5.5 to 27″ in 1/16″ increments

    TO ORDER: Indicate BFC + cabinet width (6″ only) + cabinet height. IE: BFC0634.5 for a 6 x 34.5″ high Filler Column. If different than standard 12.5″ depth is required, note as special instruction.

    DESCRIPTION:  Base Filler Column box with affixed filler.  Filler available fluted or unfluted. Tapered or rounded must be specified. See fluted filler information in Accessories section for fluting details. 3″ columns have 3 flutes, 6″ columns have 6 flutes. Standard toe box pictured. When ordered with flush toe option, there will be a 6″ margin between the floor and the flutes (except on office cabinets where margin is 2″)

  • Tall Filler Columns with Toe Kick

    Tall Filler Column, 3″ & 6″ Wide

    CABINET CODE: TFC  (CSTFC will appear on your quote if your cabinet is not one of the standard sizes – CS = Custom Sized)

    SIZES:
    Width: 3 and 6″ Only
    Height: 84 to 96″  in 1/16″ increments
    Depth: 5.5 to 27″ in 1/16″ increments

    TO ORDER: Indicate TFC + cabinet width (6″ only) + cabinet height. IE: TFC0690 for a 6 x 90″ high Filler Column. If different than standard 24″ depth is required, note as special instruction.

    DESCRIPTION:  Base Filler Column box with affixed filler.  Filler available fluted or unfluted. Tapered or rounded must be specified. See fluted filler information in Accessories section for fluting details. 3″ columns have 3 flutes, 6″ columns have 6 flutes. Standard toe box pictured. When ordered with flush toe option, there will be a 6″ margin between the floor and the flutes.

     

     

Refrigerator and Dishwasher End Panels

These panels finish off exposed appliance ends and are also useful as fillers where a return panel to the wall is needed in order to support counter, etc.Panels come with a finished/matching veneered side automatically.

Hide / show product category

  • Dishwasher Refrigerator End Panel 2434.5-2496

    Refrigerator End Panel

    CABINET CODE: REP  (CSREP will appear on your quote if your cabinet is not one of our standard sizes – CS = Custom Sized)

    SIZES
    Width: 5.5 to 30″ in 1/16″ increments
    Height: 12 to 96 in 1/16″ increments
    Filler Widths:  1.5″ or 3″ only

    TO ORDER: Indicate REP + width + height. IE: REP2496 for a 24 deep x 96 high end panel. MUST Indicate 1.5 or 3″ filler in special instructions.

    DESCRIPTION: Plywood Refrigerator end panel with integrated 1.5 or 3″ solid wood filler facing.  Not available fluted. Consider using a fluted filler and loose plywood ordered through our Accessories section. Exposed end and matching interior options are standard. Instead of using refrigerator panels, take a look at our integrated refrigerator cabinets in the Tall Cabinets section. These cabinets incorporate the upper cabinet box in to the side panel(s) for a more built in look with no seams.

  • Dishwasher Refrigerator End Panel 2434.5-2496

    Dishwasher End Panel

    CABINET CODE: DWEP  (CSEP will appear on your quote if your cabinet is not our standard size of 24 x 34.5. CS = Custom Sized)

    SIZES
    Width: 5.5 to 30″ in 1/16″ increments
    Height: 12 to 96 in 1/16″ increments
    Filler Widths:  1.5″ or 3″ only

    TO ORDER: Indicate DWEP + width + height. IE: DWEP2434.5 for a 24 deep x 34.5 high Dish Washer end panel. MUST Indicate 1.5 or 3″ filler in special instructions.

    DESCRIPTION: Plywood DW end panel with integrated 1.5 or 3″ solid wood filler facing.  Not available fluted. Consider using a fluted filler and loose plywood ordered through our Accessories section. Exposed end and matching interior options are standard.

     

     

    Description

    • Plywood Dish Washer end panel with integrated 3″ solid wood filler facing.
    • Filler can be requested 1-1/2″.
    • Filler is not available fluted. Consider a fluted filler and loose plywood available in our Accessories section.
    • Exposed end and matching interior options are standard

Appliance Garages

Appliance Garages are available in Diagonal or straight and are intended to mount under wall cabinets. Modifications are not available. Click an image to see the cabinet's sizes and options.

Hide / show product category

  • Appliance Garage 2418-3018

    Straight Appliance Garage, 12-1/2″ Deep x 18″ High

    CABINET CODE: AG  (CSAG will appear on your quote if your cabinet is not one of the standard sizes – CS = Custom Sized)

    SIZES
    Width: 24″ and 30″ Only
    Height: 18″ only
    Depth: 5.5 to 27″ in 1/16″ increments

    TO ORDER: Indicate AG + the cabinet width + cabinet height. IE: AG2418 for a 24″ wide x 18″ high AG. If deeper than standard 12.5″, note as special instruction.

    DESCRIPTION: Appliance garage with Tambour roll up door designed for use in straight cabinet runs. Top rail is 3-1/8″.  Hinged door is optional and must be specified.  Tambour door not available in custom species.

  • Corner Appliance Garage 3318

    Corner Appliance Garage

    CABINET CODE: CAG

    SIZES
    Width: 24 and 27″ Only.  NOTE: 24″ version has 12.5″ deep sides, 27″ version will have 15.5″ deep.
    Height: 18″ only
    Depth: 24 and 27″ Only

    TO ORDER: Indicate CAG + the cabinet width  + cabinet height. IE: CAG2418 for a diagonal appliance garage that is 24″ x 18. Note: BOTH ‘legs’ must be the same (24 or 27)

    DESCRIPTION:  Appliance garage with Tambour roll up door designed for use under WCS24 or 27 (diagonal wall) cabinet. Top rail is 3-1/8″. Hinged door is optional and must be specified. Tambour door not available in custom species.

Wine Storage

We offer several versions of wine storage units, from criss-cross lattice inserts to wine bottle cubbies. These are great additions to wet bars, butler pantries or just the 'entertaining' area of the kitchen.

Hide / show product category

  • WSU0630

    Wine Storage Unit – Wall

    CABINET CODE: WSU  (CSWSUW will appear on your quote if your cabinet is not one of the standard sizes – CS = Custom Sized)

    SIZES:
    Width: 6″ Only
    Height: 30, 36 and 42″ only
    Depth: 12.5 to 27″ in 1/16″ increments

    TO ORDER: Indicate WSU + width (6″ only) + height. IE: WSU0642 for a 42″ high Unit. If depth is different than standard 12.5″, note as special instruction.

    DESCRIPTION: Wine cubby for wall cabinets (standard 30,36 or 42″ heights only). Plywood construction with banded edges. Dowel assembly. 30″ has 5 openings, 36″ has 6 openings and 42″ has 7 openings. Finished ends and matching interior are standard. Not available in custom species.

  • WSUD0634.5

    Wine Storage Unit – Base

    CABINET CODE: WSUD  (CSWSUD will appear on your quote if your cabinet is not one of the standard sizes – CS = Custom Sized)

    SIZES:
    Width: 6″ Only
    Height: 34.5″ only
    Depth: 12.5 to 27″ in 1/16″ increments

    TO ORDER: Indicate WSU + width (6″ only) + height. IE: WSU0642 for a 42″ high Unit. If depth is different than standard 24″, note as special instruction.

    DESCRIPTION:  Wine cubby for Base cabinets. Plywood construction with banded edges. Dowel assembly. Interior is only 12″ to prohibit bottles from sliding back. Exposed ends and matching interior are standard. Not available in custom species.

  • Wall Lattice Kits 3015-2130

    Wine Lattice Kit for Wall Cabinet

    CABINET CODE: WLK

    SIZES:
    30 x 15, 36 x 15, 30 x 18, 36 x 18, 15 x 30, 18 x 30 and 21 x 30 (sizes are W x H) and these are the CABINET sizes the unit goes in. WLK unit does NOT include the Wall cabinet itself, just the grid insert(s)
    TO ORDER: Indicate WLK+ width + height. IE: WLK3015  for a WLK kit to fit a 30 x 15 wall cabinet.

    DESCRIPTION:  Lattice kit for criss-cross wine storage. Kit comes with trim for installing. Be sure to order corresponding cabinet with Matching interior and delete the door/shelves. Available in standard lattice profiles only (rounded edges). Not available in custom species.

Finished Wall Cabinet Bottoms

This innovative kit allows you to finish off the bottoms of your wall cabinets. Comprised of finished 1/4" plywood and our B11 light rail molding, it creates a smooth finished bottom on your wall cabinet runs which can be important especially in situations where your cabinet bottoms will be visible from seated areas in the kitchen.

Hide / show product category

  • Flush Finished Bottom

    Finished Wall Cabinet Bottom

    Description

    • 1/4″ matching specie/finish plywood which is available cut to specific sizes
    • B11 Light rail molding to cover bottom of wall cabinet and exposed edge of 1/4″ plywood