The 30SQ3 (MDF) door is a traditional arch-top door, very similar in appearance to the 30RC (MDF) door, except the top of the 30SQ3 has a slight radius at the corners of the arch. This one-piece, solid MDF (Medium Density Fiberboard) door is an optimal selection for a painted kitchen with a traditional door design.
- Available in painted MDF using any of our Colortone (CWS) paints, custom Prism (Sherwin Williams) paint collection, or in Primer (customer to paint).
- Also available in raw, unfinished (none – finished by customer) MDF.
The cross-section below is an example of how your door will look, but any profiles you choose will determine the final look of your door.
|Edge Profiles:||B-2, C-2, H-2, L-034, L-059, L-149, L-253, L-382, L-686, L-803, L-1160, LC-2, ME (Machined Edge), PRS-2, & V-2.|
|Framing Beads:||None – Design Specific, no options. (note: the SQ series are square on the inside of the framing, except the top of the 30SQ3 which has a slight radius at the corners of the arch.)|
|Panels Raises:||None – Design Specific, no options.
(note: MDF products greater than 26″ wide or 48″ high will be made with two equal panels, unless otherwise specified.)
AVAILABLE DESIGN OPTIONS
|Mullion/Frame only Doors:||Yes – Standard lite configurations only.|
|Pegs and Grooves:||No|
|Appliance Panels:||Yes – Apply over plywood or 1/4″ MDF panel.|
|Door Frame Modifications:||Yes|
|Hinges/Hinge Boring:||Yes – Hinge boring is automatic when ordered with RTA cabinets, but no hinging can be requested. If ordering doors only, hinging must be specified.|