Rout prepares a standard drawer box to accept a sliding lid.
Lid not included. We recommend a piece of 1/4″ plywood be ordered cut to size or that the customer procure a piece of plexiglass from local hardware store. A finger hole can be drilled in the lid or the customer can use a low profile knob or pull
Lid automatically closes when the drawer shuts
Lid should be sized based on inset or overlay cabinetry. Use 22-1/8″ deep lid for overlay cabinets and 22-3/4″ for inset cabinet. The lid will strike the back of the cabinet and push the lid closed as the drawer is closed.
