TW-10916
$0.00
The TW-10916 is a veneered panel door which uses a 9/16″ thick veneered center panel to give the door a heavier feel than the simple 1/4″ thick veneer panel doors. It is important to note that the drop from the framing to the panel face is shallower on this door than a standard door (1/8″ drop instead of 3/8″). Standard framing width is 2-5/16″.
The cross-section below is an example of how your door will look, but any profiles you choose will determine the final look of your door.
About the Picture: Shown in Red Oak with Driftwood stain. L-149 Edge profile, Design Specific Framing Bead and 9/16″ plywood panel.
Out of stock
Description
AVAILABLE PROFILES
| Edge Profiles: | All 3/4" profiles available. |
|---|---|
| Framing Beads: | None - Design specific, no options. |
| Panels Raises: | None - 9/16" veneered panel only. |
AVAILABLE DESIGN OPTIONS
| Mullion/Frame only Doors: | No - For mullions or frame only, order TW-10 door with: ME Edge, Square Framing Bead, and then frame only or mullion option as desired. |
|---|---|
| Wainscot Panels: | Yes |
| Pegs and Grooves: | Yes - Limited groove options. |
| Appliance Panels: | Yes - Apply over plywood. |
| Door Frame Modifications: | Yes |
| Hinges/Hinge Boring: | Yes - Hinge boring is automatic when ordered with RTA cabinets, but no hinging can be requested. If ordering doors only, hinging must be specified. |