Wall Hung Vanity Cabinet w/Double Doors – WHV/CSWHVCS

$1.00

  • Sides come unfinished as standard but can be finished to match using one of these common options. Each is called out as facing the cabinet.


    Popular options to consider for this cabinet, making your installation and design look even better.


    Common options for the doors on this cabinet, such as glass, open shelf (no door).



Description

Vanity cabinet meant to hang from wall with no support below. Double doors (center partition in face frame). Can utilize normal drop-in sink or, ideally, a vessel sink. Available in Advantage all plywood cabinet only. Constructed with a full top (top will need to be cut out in the field by the customer to fit sink/plumbing). Kit includes 2 precut 2 x 4 installation cleats.

NOTE: The load capacity of these cabinets is greatly dependent on the quality of the installation screws and whether the cabinets are properly secured to wall studs. If not secured to at least 2 wall studs using high-quality screws, the cabinet may not support the desired weight of granite top, bowl, etc. Conestoga nor Cabinet Joint will be held liable for failure due to inadequate installation techniques or materials.

SIZE OPTIONS:

Width: 27″ to 48″ in 1/16″ increments

Height: 18″ to 24″  in 1/16″ increments

Depth: 18″ to 21″ in 1/16″ increments

 

Reviews

There are no reviews yet.

Be the first to review “Wall Hung Vanity Cabinet w/Double Doors – WHV/CSWHVCS”

Your email address will not be published. Required fields are marked *